header_signet
Arming LED with buzzer

Item number: AT8217
EAN: 4250354120831

  • Arming: sounds a long tone and the red LED lights solid
  • Disarming: two short tones sound and the blue LED lights solid
  • Alerts about flashing the red-blue LEDs

69,00 €

including 19% VAT. , plus shipping

Available now!

Shipping time: 1 - 3 workdays


piece


The transmitter is easy to mount through the strong 3M adhesive pad on the back and is white through the plain white. very inconspicuous. If you turn it on, you will hear a long beep and the red LED will be on solid, if it is disarmed you will hear two short tones and the blue LED will be solid. You will also be alerted to warnings about flashing the red-blue LEDs.Der Sender ist leicht zu montieren durch das starke 3M Klebepad auf der Rückseite und ist durch das schlichte weiß sehr unauffällig. Wenn Sie scharf schalten ertönt ein langer Ton und die rote LED leuchtet durchgehend, beim unscharf schalten ertönen zwei kurze Töne und die blaue LED leuchtet durchgehend. Ebenfalls werden Sie auf Warnmeldungen hingewiesen über ein Wechselblinken der rot-blauen LEDs.

 

You can see at any time whether the central unit is armed or disarmed or if there is a warning message on the control panel. In addition, you can still hear whether the control panel has armed or disarmed before the door. Disarming is signaled by two short and arming signals by a long beep. In the evening, on the way to the bed, pressing a button on the switch panel will allow you to arm the panel, with an arming style of your choice.

 

All these functions are available with each LED switch display, so you can also in the hall, in the living room, in the upper floor; or install a LED switch display in the garage, all always indicate the state of the control panel. The arming LED with buzzer is not IP verified and can not be mounted in the outdoor area.

                        

All arming LED with Buzzer work as a full repeater, which forwards the signals of all sensors to the control panel. This is very helpful when sometimes a sensor has to be mounted in a position with a weak radio link, e.g. In the basement, the LED switch display in the hallway above can pick up the signal from the basement and forward it to the control center.

 

Delivery:

1 x Arming LED with buzzer
1 x 3m USB-Angle Connector
1 x 2-Fach USB-Plug
1 x Adhesive pad for mounting

Average product review

Write your first review and help others with their purchase decision: